The dishwasher door slams shut
Resolution
Issue
- The dishwasher door slams shut.
- The dishwasher door closes itself - the appliance cannot be loaded
Applies to
- Integrated dishwashers
Resolution
1. It is necessary to install the outer doors panel for hinges to work correctly.
For more information refer to installation instruction supplied with your appliance. Download .
2. Contact an Authorized Service Center.
If the above suggestions does not solve the problem, we recommend requesting a visit by a service engineer.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- How to disable the AirDry function in a dishwasher with a QuickSelect panel (level 1)
- Dishwasher door will not close properly or is crooked
- Dishwasher displays error code i23, not draining
- Symbols and programmes on your Electrolux dishwasher
- Rust spots on cutlery after washing in the dishwasher
- Dishwasher displays error code i30
- Dishwasher door does not close
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher does not beep at the end of the cycle
Related Articles
- How to disable the AirDry function in a dishwasher with a QuickSelect panel (level 1)
- Dishwasher door will not close properly or is crooked
- Dishwasher displays error code i23, not draining
- Symbols and programmes on your Electrolux dishwasher
- Rust spots on cutlery after washing in the dishwasher
- Dishwasher displays error code i30
- Dishwasher door does not close
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher does not beep at the end of the cycle