Dishwasher door will not close properly or is crooked
Resolution
Issue:
- Dishwasher door will not close properly or is crooked
Applies to:
- Integrated dishwasher
Resolution:
1. Make sure the appliance is correctly levelled
Try adjusting the appliance feet and checking it again with a spirit level
2. Contact the engineer who installed the appliance to ensure that the latch and door have been installed in accordance with the installation manual.
Misalignment of latches and/or hinges can cause the dishwasher door to not close properly or be crooked
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Cause:
- Misalignment of latches and/or hinges can cause the dishwasher door to not close properly or be crooked
Was this article helpful?
Related Articles
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher displays error code i30
- Dishwasher door does not close
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher does not beep at the end of the cycle
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error code iF0, iFo or iF1
- How to change the drain filter in my Electrolux dishwasher? (video)
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
Related Articles
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher displays error code i30
- Dishwasher door does not close
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once
- Dishwasher does not beep at the end of the cycle
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error code iF0, iFo or iF1
- How to change the drain filter in my Electrolux dishwasher? (video)
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme