Integrated built-in dishwasher door stuck closed
Issue
- Integrated built-in dishwasher door stuck closed
Applies to
- Integrated dishwashers
Resolution
- Check the appliance is not still performing a cycle
- Make sure the dishwasher is correctly levelled, try adjusting the appliance feet and checking with a spirit level.
- Contact the engineer who installed the appliance to ensure the latch and door have been installed in accordance with the instruction manual. If you are having issues the appliance may have been installed incorrectly - contact your installer to check if the door requires adjustment.
- Reset the appliance, switch off the power to the appliance then switch it back on again after 20 - 30 seconds. Test if the appliance is working
- You may require a visit by a service engineer
Cause
- Misalignment of latches and or hinges can cause the dishwasher door not to open and close properly and become crooked
Was this article helpful?
Related Articles
- Dishwasher does not / will not start but the power is on
- Symbols and programmes on your Electrolux dishwasher
- How to deactivate/turn off AirDry/door opens automatically on AEG dishwasher
- Dishwasher displays error code i30
- Is it possible to connect the dishwasher to hot water supply?
- How to disable the AirDry function in a dishwasher with a QuickSelect panel (level 1)
- How to clean delicate glasses in your Electrolux dishwasher using SoftGrips and SoftSpikes
- Dishwasher displays error code i40, i43 or i44
- Dishwasher displays error code I20, C2, F2 or AL6, or beeps twice, not draining
- How to add rinse aid to your Electrolux dishwasher