Washing machine's door can be opened and water runs out onto the floor
Resolution
Issue:
- Washing machine's door can be opened and water runs out onto the floor
Applies to:
- Front loaded washing machine
Resolution:
1. Start a draining cycle before turning off the machine and opening the door, otherwise the water will run out onto the floor.
2. Contact an Authorized Service Center.
If the door can be opened with water in the machine and the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Cause:
- If a wash cycle with a "Rinse Hold" was chosen and the machine was turned off by using the cycle selector or disconnecting it from the power, the door can be opened after a few minutes, even though there is water in the machine.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Top loading washing machine does not have a filter/filter cannot be located
- After cleaning the pump filter, the washing machine hums and does not start washing
- Washing machine emits humming / pumping noise
- Washing machine emits noises and shakes while spinning
- Washing machine displays an error code, how to fix it?
- Connected appliances - problems with onboarding and Wi-Fi connection
- The washing cycle is shorter / longer than indicated on the display
- Washing machine’s fluff filter is jammed, cannot be removed