Washing machine inlet hose is leaking
Resolution
Issue:
- Washing machine inlet hose is leaking
Applies to:
- Front loader washing machine (integrated and freestanding)
- Top loader washing machine
Resolution:
1. Check the following:
- Inspect the inlet pipe adapter on the wall or water tap
- Check if the pipe connection is screwed on and tightened properly
- Check if there is no leak coming from the tap
- Check the water supply connection to the inlet of the machine
- The connection should be screwed on and tightened properly
Note: Fault due to installation is not under warranty and you may be charged for a service visit by an engineer, even during the warranty period.
Warning: Do not use pliers or any other similar tool to tighten the pipe connection. It should be tightened only by hand!
2. Contact an Authorized Service Center.
If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.
Important: If the hose is damaged (separated or cracked), disconnect the water supply to the machine and contact Authorized Service Centre.
Was this article helpful?
Related Articles
- The washing cycle is shorter / longer than indicated on the display
- Connected appliances - problems with onboarding and Wi-Fi connection
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not work / does not react
- How to connect your Electrolux washing machine, tumble dryer or washer dryer to the app
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- How to change the temperature in the ECO 40-60° program?
- Removing and cleaning a washing machine detergent dispenser drawer
- What's the difference between spin classes in washing machines?