Integrated built-in dishwasher door stuck closed
Issue
- Integrated built-in dishwasher door stuck closed
Applies to
- Integrated dishwashers
Resolution
- Check the appliance is not still performing a cycle
- Make sure the dishwasher is correctly levelled, try adjusting the appliance feet and checking with a spirit level.
- Contact the engineer who installed the appliance to ensure the latch and door have been installed in accordance with the instruction manual. If you are having issues the appliance may have been installed incorrectly - contact your installer to check if the door requires adjustment.
- Reset the appliance, switch off the power to the appliance then switch it back on again after 20 - 30 seconds. Test if the appliance is working
- You may require a visit by a service engineer
Cause
- Misalignment of latches and or hinges can cause the dishwasher door not to open and close properly and become crooked
Was this article helpful?
Related Articles
- Dishwasher displays error code i24, not draining
- Dishwasher displays error code i23, not draining
- Dishwasher displays error code i28, not draining
- Dishwasher does not switch on, no light on the control panel
- Dishwasher leaves white residue on dishes and cutlery
- Dishwasher does not / will not start but the power is on
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher is not heating up water
- Dishwasher displays error code i40, i43 or i44
- Dishwasher salt consumption is too high