Electrolux dishwasher care guide: Do's and Don’ts

Resolution

Regular cleaning and maintenance help prevent grease and limescale build-up, maintain good cleaning results, and keep your Electrolux dishwasher in great condition. Follow these simple do’s and don’ts to help your appliance perform at its best.

Safety first

The do’s

• Do turn off and unplug the dishwasher before cleaning. Always disconnect the power supply before removing or cleaning internal parts, such as filters and spray arms.

The don’ts

• Don’t remove or clean internal parts while the dishwasher is connected to power. Make sure the appliance is turned off and unplugged before starting any maintenance.

After every use

The do’s

• Do check the filters and sump area after every wash. Remove any food residue or debris, and rinse the filters under running water when needed.

• Do remove and clean all three filter parts correctly. Turn the round filter (B) anticlockwise and lift it out, separate filter (C), then remove the flat filter (A).

The don’ts

• Don’t leave food residue or debris trapped in the filters. Remove any food particles, glass fragments or plastic to help prevent blockages and damage to your dishwasher.

• Don’t reinstall the filters loosely. Secure the flat filter (A) using its rear locking mechanism, then refit filters (B) and (C) and turn clockwise to lock them in place.

Twice a month

The do’s

• Do run a maintenance wash twice a month. Use a long, hot programme with an empty dishwasher, or select the dedicated Machine Care programme when the indicator lights up.

• Do clean the filters and spray arms before starting Machine Care. Use a recommended dishwasher cleaner, such as Clean & Care, to help remove grease and limescale.

The don’ts

• Don’t use only short or eco programmes. Run a long, hot programme regularly to help prevent grease and limescale build-up inside your dishwasher.

Regular maintenance

The do’s

• Do clean the rubber door seal regularly. Gently wipe it with a soft, damp cloth to remove dirt and residue.

• Do clear blocked spray arm nozzles. Use a toothpick to gently remove trapped debris, then rinse the spray arms under running water.

• Do remove the cutlery drawer carefully when cleaning the top spray arm. If your dishwasher has a cutlery drawer, release the rail stoppers before removing it to access the spray arm.

The don’ts

• Don’t use harsh cleaners or abrasive tools on the door seal. Avoid scouring pads, sharp objects, strong chemicals and solvents that could damage the rubber.

• Don’t force the spray arms back into place. Follow your dishwasher’s instructions to make sure they’re correctly aligned and securely fitted.

A little regular maintenance goes a long way. Keep your dishwasher clean and in great condition with the right cleaning products.

Explore our dishwasher care products.