Display of my washing machine is blurry
Issue
- Display of my washing machine is blurry
Applies to
- Front loading Washing Machines
- Top loading Washing Machines
Resolution
If the display of my washing machine is blurry, refer to the suggestions below for step by step instructions.
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Connected appliances - problems with onboarding and Wi-Fi connection
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine stops in the middle of a cycle
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not spin
- Why are there holes in my laundry after washing? How to prevent holes in washing machine laundry?
- Washing machine and tumble dryer WiFi help
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine emits noises and shakes while spinning
- Washing machine displays error message EHO / EH0