An acoustic signal is heard and the gas plate switches off by itself
Issue
- An acoustic signal is heard and the gas hob switches off by itself
- An acoustic signal sounds when the hob is deactivated
Applies to
- Electronic Gas hobs
Resolution
1. Remove the object from the sensor fields.
2. Avoid touching the sensor field for more than 10 seconds.
Cause
- You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Was this article helpful?
Related Articles
- Induction hob emits an unusual sound
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Hob sealing strip replacement
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Electric Hob Installation Faults: Causes & Recommended Solutions
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Hob displays error message E8 / E822
- Hob displays message L, the hob is locked
- Hob displays error message E7
- Hob displays message U or | |