Gas Hob - How To Clean Your Pan Supports, Burners and Burner Caps
Issue
- Gas Hob - How To Clean Your Pan Supports, Burners and Burner Caps
- How to clean the gas hob
Applies to
- gas hobs
Resolution
The top tip for cleaning our appliances is to use hot, soapy water and wash by hand.
This applies to pan supports, burners, and burner caps in this instance.
These are NOT dishwasher safe.
If there are any stubborn marks on the supports, burners, or burner caps, a soft brush can be used.
If your hob has controller knobs that come off, allow them to soak in a bowl of white vinegar. (If you can't remove the knobs, spray them thoroughly with the solution.)
The video below shows specifically how to wash the pan supports and burner caps, however, the burners themselves can also be washed in this way.
How To Clean Your Gas Hob Burner Caps And Pan Supports
How to clean your AEG stainless steel gas hob
How to clean your AEG gas on glass and electronic gas hob
Was this article helpful?
Related Articles
- Hob displays error message E9
- What cookware is suitable for cooking zones with induction heating?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays message L, the hob is locked
- Induction hob rear zone discolouration after boiling pan of water for pasta or rice
- Hob displays message F
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays error message E5
- Hob displays error message E8 / E822
- Hot plate cannot be activated or is not operating