Hob blows/ trips fuse
Issue
- Hob/cooker continuously blows / trips the fuse
- Hob tripping power
Applies to
- Induction hobs and cookers
- Ceramic hobs and cookers
- Gas hobs and cookers
Resolution
1. Make sure that the fuse is sufficient for the power load.
Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.
2. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- How to use the child lock and lock function on your Electrolux induction hob
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hot plate cannot be activated or is not operating
- Hot plate cooks slowly
- Hob displays error message E7
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Can I put a protection mat on the induction hob?
- Gas Hob Ignition Won't Spark
- Only one side of the hob is operating