Why does my washing machine or tumble dryer program end / finish time change and vary?
Issue
- Why does my washing machine, tumble dryer or washer dryer program end time change and vary
Applies to
- Washing Machines
- Tumble Dryers
- Washer Dryers
Resolution
Every wash is different and our machines offer bespoke results. Think of the programme time first presented as a "best guess".
The sensors in the machine after approximately 15 minutes will start to calculate if the wash needs a little longer or if it can save time and energy but not over washing unnecessarily and reducing the time.
The washing machine automatically adjusts the program duration to the amount of washing. The sensor also measures how dirty your laundry is. As soon as the detection is complete, the "kg" indication disappears. You now see the shortened program duration; the washing program starts. Every AEG washing machine has a ProSense load sensor.
As soon as you press the start button, the washing machine weighs how much laundry is in the drum. The drum rotates a few times while "kg" flashes in the display. And the calculating sensors have started to measure and make their calculations.
Was this article helpful?
Related Articles
- Washing machine does not take detergents / water remains in the fabric softener compartment
- How to clean and maintain your Electrolux washing machine and extend its life
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine is leaking water
- Washing machine blows fuses / trips RCD circuit breaker
- The door of the washing machine cannot be opened
- Washing machine’s fluff filter is jammed, cannot be removed
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine displays an error code, how to fix it?
- Washing machine stops in the middle of a cycle