Washing machine displays error message E80 or emits 8 flashes
Issue
- Washing machine displays error code E80 (or any code beginning with E81, E82 etc.). It generally refers to a problem with the recirculation pump or User Interface of your washing machine
Applies to
- Front loader washing machine
- Top loader washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause
- a fault with the recirculation pump or control panel on your machine
Was this article helpful?
Related Articles
- Washing machine’s fluff filter is jammed, cannot be removed
- The door of the washing machine cannot be opened
- Connected appliances - problems with onboarding and Wi-Fi connection
- Fabric conditioner runs directly down into the washing machine's drum
- Washing machine is leaking water
- Why are there holes in my laundry after washing? How to prevent holes in washing machine laundry?
- Why Do White Clothes Turn Grey After Washing? Causes & Easy Fixes
- Washing Machine Error E10, E11 or C1? How to Fix Water Supply & Drain Issues
- After cleaning the pump filter, the washing machine hums and does not start washing
- Washing machine emits noises and shakes while spinning