Washing machine displays error message E70
Issue
- Washing machine displays error message E70 (or any code beginning with E7*). It generally refers to a temperature sensor problem with the machine.
Applies to
- Washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause
- The Temperature ( NTC ) sensor in your appliance has stopped working or is damaged
Was this article helpful?
Related Articles
- Washing machine blows fuses / trips RCD circuit breaker
- Can the washing machine's door be reversed?
- Fabric conditioner does not dissolve in my washing machine
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Opening washing machine's door at the beginning of wash cycle
- The door of the washing machine cannot be opened
- After cleaning the pump filter, the washing machine hums and does not start washing
- How to drain a washing machine/washer dryer
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine emits humming / pumping noise