Washer dryers care: Do's and Don'ts
Resolution
Maintain the efficiency of your drum and prevent "musty" odours.
The Do's
- Do run a monthly maintenance wash: Empty the drum and run a hot cycle at 90°C to kill bacteria and eliminate slimy biofilm.
- Do check your pockets: Always clear out coins, hairpins, and loose objects before a wash, as they are the leading cause of blocked drain pumps and torn drum seals.
- Do descale every 6 months: Use a professional descaler (like Super Care) twice a year to combat limescale, especially if you live in a hard-water area.
- Do wipe down the rubber seal: Give the door gasket a quick wipe every month to remove trapped lint, hair, and slimy debris.
The Don'ts
- Don't close the door immediately after a cycle: Leave both the machine door and the detergent drawer slightly ajar to allow air circulation and prevent mold and musty odors from developing.
- Don't overuse detergent: Avoid the temptation to use extra soap. Excess detergent doesn't mean cleaner clothes—it builds up residue in the pipes and triggers "E20" drainage errors.
- Don't use harsh abrasives on the drum: Never use wire wool or abrasive stainless-steel cleaners inside the drum, as they cause micro-scratches that can ruin the surface.
Was this article helpful?
Related Articles
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer displays "check air filter" indicator
- Washer dryer does not take detergents / water remains in the softener compartment
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Washer-dryer emits noises and shakes while spinning
- Washer dryer displays error message EF0, EF3 or emits 15 beeps / 15 flashes
Related Articles
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer displays "check air filter" indicator
- Washer dryer does not take detergents / water remains in the softener compartment
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Washer-dryer emits noises and shakes while spinning
- Washer dryer displays error message EF0, EF3 or emits 15 beeps / 15 flashes