Handle of the washer - dryer door is faulty
Resolution
Issue:
- Handle of the washer - dryer door is faulty
Applies to:
- washer dryer
Resolution:
1. When a cycle has just finished, it may be impossible to open the door.
- This is a standard feature of the door lock to ensure no leaks.
- The lock will usually release after 2-5 minutes.
- If this does not resolve the issue, determine whether any of the handle’s parts show any visible signs of damage.
2. If the handle is damaged or if the door is still jammed, we recommend requesting a visit by a service engineer.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer-dryer displays error message E50, C9 or F9
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer does not take detergents / water remains in the softener compartment
- Washer - dryer inlet hose is leaking
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Washer-dryer emits noises and shakes while spinning