Washer - dryer does not switch on after a drying cycle
Issue
- Washer-dryer does not switch on after a drying cycle
Applies to
- Washer-dryers
Resolution
If the washer-dryer does not switch on after a drying cycle, there is a technical problem with the appliance.
- Contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Fabric conditioner runs directly down into the washer-dryer’s drum
- How to clean and maintain your Electrolux washer dryer
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer-dryer displays error message E50, C9 or F9
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays "check air filter" indicator
- Washer-dryer emits noises and shakes while spinning
- Clothes are too creased after washing in the washer dryer
Related Articles
- Fabric conditioner runs directly down into the washer-dryer’s drum
- How to clean and maintain your Electrolux washer dryer
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer-dryer displays error message E50, C9 or F9
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays "check air filter" indicator
- Washer-dryer emits noises and shakes while spinning
- Clothes are too creased after washing in the washer dryer