Washer-dryer displays error message E50, C9 or F9
Resolution
Issue:
- Washer-dryer displays error messages E50, E59, C9 or F9. This message indicates that a motor fault has occurred.
Refers to:
- Washing machine
- Washer-dryer
Resolution:
- Contact our service department for an appointment.
We recommend that you stop using the device until the problem is solved by a technician. Unplug the power cord and turn off the tap.
Was this article helpful?
Related Articles
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Clothes are too creased after washing in the washer dryer
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer does not take detergents / water remains in the softener compartment
- Fabric conditioner runs directly down into the washer-dryer’s drum
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer dryer displays "check air filter" indicator