Washer dryer displays "check air filter" indicator
Issue
- Washer dryer displays "check air filter" indicator
- Washer dryer displays clean filter indicator
- The app displays message EF7
Applies to
- Heat pump washer-dryer
Resolution
Occasionally the indicator may flash to remind you that both air filters should be cleaned: the primary air filter and the secondary air filter (for the secondary filter, see pictures from 6 to 8). The acoustic signal operates.
- Make sure that the air filter has been cleaned.
- Make sure that the air filter is correctly inserted
- To have best drying performances clean the air filters regularly with warm water and afterwards dry them with a towel.
- Clogged air filter increases the drying time and energy consumption!
Was this article helpful?
Related Articles
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Fabric conditioner runs directly down into the washer-dryer’s drum
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer-dryer emits noises and shakes while spinning
- Clothes are too creased after washing in the washer dryer
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer does not take detergents / water remains in the softener compartment
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E30, C3 or emits 3 beeps