ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - No water come out from the nozzle
Issue
- No water come out from the nozzle
Applies to
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner
- models: AW81U3DB, EW81U3DB
Resolution
Possible reason | Solutions |
No water in clean tank | Add water in clean tank |
The clean tank is not installed properly | Reinstall the clean tank |
The clean tank check valve is blocked | Replace the clean tank |
Pump blockage | Return the product to the service network for repair |
Waterway blocked | Return the product to the service network for repair |
Was this article helpful?
Related Articles
- Stick vacuum cleaner does not charge the batteries
- Battery replacement in cordless vacuum cleaners
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - charging problems
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “Dirty Water Tank Full” icon blinks
- How to do maintenance on your Electrolux cordless vacuum cleaner
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “TURBO” flashes on the display
- Electrolux 800 vacuum cleaner - nozzle problems
- 800 Cordless Cleaner - powerful and versatile charging station
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - self-cleaning does not start
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - The suction is weakened
Related Articles
- Stick vacuum cleaner does not charge the batteries
- Battery replacement in cordless vacuum cleaners
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - charging problems
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “Dirty Water Tank Full” icon blinks
- How to do maintenance on your Electrolux cordless vacuum cleaner
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “TURBO” flashes on the display
- Electrolux 800 vacuum cleaner - nozzle problems
- 800 Cordless Cleaner - powerful and versatile charging station
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - self-cleaning does not start
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - The suction is weakened