ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - charging problems
Issue
- The vacuum cleaner cannot be charged
- Charging problems
Applies to
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner
- models: AW81U3DB, EW81U3DB
Resolution
Possible reason | Solutions |
The charging stand is not plugged in properly | Check that the plug is properly connected |
The machine is not fully plugged into the charging stand | Check that the machine is positioned correctly |
The adaptor is in poor contact with the charging stand | Check that the adaptor is properly connected to charging stand |
Was this article helpful?
Related Articles
- 800 Cordless Cleaner - powerful and versatile charging station
- How to do maintenance on your Electrolux cordless vacuum cleaner
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “Dirty Water Tank Full” icon blinks
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - self-cleaning does not start
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - “TURBO” flashes on the display
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - The suction is weakened
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - Power display (3 LED lights) flash four times before turning off
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - Nozzle icon blinks
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - Power display (3 LED lights) flash three times before turning off
- ULTIMATE 8000 Wet&Dry cordless vacuum cleaner - Icon flashes for clean water tank water shortage