Electrolux 800 vacuum cleaner - nozzle problems
Issue
- The nozzle in my Electrolux 800 vacuum cleaner is broken
- The hard floor nozzle (with LED lighting) has stopped working
- The brush light goes flashing and the program, which was used is switching to a different one also the brush underneath stops spinning
- How to replace the broken nozzle in my Electrolux 800 vacuum cleaner?
Applies to
- Electrolux 800 vacuum cleaners (EP81xxx models)
Resolution
The brush motor connector might fall out due to continuous vibration.
Contact our Consumer Care Team for a suitable solution. Please mention "800 vacuum cleaner nozzle issue" in the description.
Change the nozzle according to the instructions provided

Step 1. Release the nozzle
Push the button or push down the arm (foot release) to release the nozzle

Step 2. Install the nozzle
Push the nozzle and tube together until a click sound can be heard.
