Tumble dryer door opens during a cycle
Issue
- Tumble dryer door opens during a cycle
Applies to
- Tumble dryers
Resolution
The tumble dryer may be overloaded. You will find information on maximum loading in the .
- Take some clothes out of the appliance.
- Start the program again.
- If the above tips do not help, contact our customer service
Was this article helpful?
Related Articles
- How to change the dryer door opening directions?
- Clothes are still wet at the end of the drying cycle
- Water leakage from under the dryer
- Cleaning tumble dryer filters and condenser
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer ends the programme immediately after the start
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E50
- Tumble dryer's drying results are poor and laundry is damp after drying
- Condenser tumble dryer taking too long to finish