Tumble dryer displays error message "Err"
Resolution
Issue
- Tumble dryer displays error message "Err". It appears when there is an attempt at changing a cycle or settings after the cycle has started or chosen option cannot be used with the selected cycle.
Applies to
- Vented dryer
- Condenser dryer
- Heat pump dryer
Resolution
1. Switch the dryer off and on, then select the desired cycle and options.
Additional information can be found in the user manual.
Download the .
2. Make sure that the door is fully closed before starting the programme.
Was this article helpful?
Related Articles
- Start - Pause LED flashes on tumble dryer
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Cleaning tumble dryer filters and condenser
- Condenser tumble dryer taking too long to finish
- Clothes are still wet at the end of the drying cycle
- Tumble dryer’s water tank is empty
- How to clean and maintain your Electrolux tumble dryer to prolong its life
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer displays error code E9E
- Drying Temperature in Heat Pump Tumble Dryer