Tumble dryer displays error message CE / CF
Issue
- Tumble dryer displays error message CE / CF
Applies to
- tumble dryer
Resolution
1. If the tumble dryer displays error code CE or CF, there is a problem with the electronics.
2. To resolve this issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Drying Temperature in Heat Pump Tumble Dryer
- Heat pump tumble dryer clothes do not seem hot enough and taking too long to finish (video)
- Tumble dryer does not start / does not work
- Start - Pause LED flashes on tumble dryer
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Cleaning tumble dryer filters and condenser
- Before using your Electrolux tumble dryer for the first time
- Tumble dryer not drying, not drying properly, too long drying
- Clothes are still wet at the end of the drying cycle