Too much foam in the dishwasher during or after finish of the cycle
Issue
- Foam in washing section
- The foam goes out of the dishwasher's door
- Error message i30 appears on the dishwasher's display
- Excessive foaming in dishwasher
Applies to
- Integrated dishwashers
- Freestanding dishwashers
Resolution
1. Clean the inside of the dishwasher using clean water only without any detergents and run a short cycle without any dishes and detergents.
2. Do not use any supporting detergents (like dish soap).
Only use salt, rinse aid and detergent for the dishwasher. Other products can cause damage to the appliance.
Dishwasher detergent should not be confused with hand dishwashing detergent. They should not be used interchangeably and hand dishwashing liquid should never be used in a dishwasher. This can cause intense foaming and may even damage the appliance.
3. Remove all food particles residing on the dishes before loading them into the dishwasher.
Cause
- Check you are using the correct detergent. Washing up liquid must not be used in a dishwasher
- Ensure you don't mix washing up liquid and rinse aid in the rinse aid chamber
- Multi-tab detergent already contains rinse aid, therefore, additional rinse aid can result in overdosing
- Washing up by hand is not required prior to using the dishwasher, washing up liquid on your crockery can result in excess foam
- Don't pre-rinse, only scrape your plates as dishwasher detergent is designed to handle certain levels of grease and soil. Pre-rinsing unbalances this and can lead to excess foam
- Take care when refilling the rinse aid container and wipe away any spillage. Spilt rinse aid will foam when the program starts
Was this article helpful?
Related Articles
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher installation (Sliding door)
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher displays error code iF0, iFo or iF1
- Dishwasher is not heating up water
- Before using your Electrolux dishwasher for the first time
- Program not starting and cycle indicator light flashing on dishwasher
- Dishwasher displays an error code, how to fix it?
- Dishwasher displays error code i40, i43 or i44
- Dishwasher displays error code i24, not draining