The display of the dryer shows different running times for the same programme
Resolution
Issue:
- The display of the dryer shows different running times for the same programme
- The actual programme duration differs from the one specified in the user manual
Applies to:
- Heat pump dryer
Resolution:
1. The appliance is working correctly.
The drying duration is calculated according to various parameters, such as:
- ambient temperature
- initial laundry moisture
- load mass and type
The displayed time adjusts to the actual programme duration.
Was this article helpful?
Related Articles
- Condenser tumble dryer taking too long to finish
- Tumble dryer displays error message E60 and does not heat up
- Heat pump dryer's drying cycle is too long
- Start - Pause LED flashes on tumble dryer
- Cleaning tumble dryer filters and condenser
- Clothes are still wet at the end of the drying cycle
- Iron Aid tumble dryer displays error message Err
- Drying Temperature in Heat Pump Tumble Dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer displays error code E54