SenseBoil indicators blink on induction hob
Issue
SenseBoil® indicators blink
SenseBoil® function does not work
Cannot activate the SenseBoil® function
How to use the SenseBoil® function?
Applies to
- induction hobs with SenseBoil® function
Resolution
1. Make sure the surface of the hob is dry.
2. Finish previous cooking activities or choose a free cooking zone without any residual heat.
If all cooking zones are already in use or there is some residual heat on all of them, the hob emits a beep sound, the SenseBoil® indicators blink and the function does not start.
3. Select a cooking zone within 5 seconds of activating the SenseBoil® function.
4. If the above advice does not work, check and change the power limitation settings on the hob.
Refer to the full description available in the user manual supplied with the appliance.
Download the user manual.
Caution: Make sure that the selected power fits the house installation fuse. Technical help is recommended.
Was this article helpful?
Related Articles
- How to use the child lock and lock function on your Electrolux induction hob
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hot plate cannot be activated or is not operating
- Hot plate cooks slowly
- Hob displays error message E7
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Can I put a protection mat on the induction hob?
- Gas Hob Ignition Won't Spark
- Only one side of the hob is operating