Seal on the washing machine's door is damaged
Issue
- The seal on the washing machine's door is loose, damaged or deformed
- The seal on the washing machine door is twisted and leaking
Applies to
- Front loader washing machine (integrated and freestanding)
Resolution
1. Contact an Authorised Service Center.
If the door seal is loose, damaged or deformed we recommend requesting a visit by a service engineer to replace the seal.
Warning: We recommend not to use the appliance if the door seal is damaged. Using the machine with a damaged door seal may lead to the appliance or property damage.
Cause
1. Damage to the washing machine's door seal can be caused by the following:
- Zips, metal buttons and other metallic objects catching the door seal when loading and unloading the appliance.
- Overloading the machine or catching the laundry between the seal and the door pane when closing the door.
2. Washing fabrics which are heavily soiled with oil, grease or other greasy substances can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
Was this article helpful?
Related Articles
- After cleaning the pump filter, the washing machine hums and does not start washing
- How to drain a washing machine/washer dryer
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine emits humming / pumping noise
- The door of the washing machine cannot be opened
- Washing machine stops in the middle of a cycle
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine displays "CLE" - drum cleaning reminder
- Connected appliances - problems with onboarding and Wi-Fi connection
- How to change the temperature in the ECO 40-60° program?