PF error code is displayed on the dishwasher's display
Issue
- Dishwasher shows error code PF on the panel
Applies to
- Freestanding dishwasher
- Built-in dishwasher
Resolution
- PF (Power Failure) code indicates low operating voltage
- The electrical supply voltage is out of range and might indicate a fault in your electrical installation. The washing program is temporarily stopped. As the electrical voltage improves, the machine continues to operate automatically.
- To avoid damage to the machine, we recommend leaving the dishwasher switched off until the voltage is OK, and not using the appliance.
- Book a repair
If the above did not solve the problem, we recommend booking a repair.
Was this article helpful?
Related Articles
- Dishwasher leaves white residue on dishes and cutlery
- Dishwasher installation (Sliding door)
- Dishwasher settings reset after each cycle
- Compact dishwasher displays error message E1, does not fill with water
- Dishwasher does not dry or dries poorly
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher is making unusual noises
- Dishwasher emits clicking/ticking noise during cycle
- Dishwasher displays error code i50