Iron Aid tumble dryer displays error message Err
Resolution
Issue:
- Iron Aid tumble dryer displays error message Err
Applies to:
- Iron Aid tumble dryer
Resolution:
1. If the Iron Aid tumble dryer displays error message Err, fill the steam tank up to the MAX. level.
2. If the icons are still flashing, contact an Authorized Service Center.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- How to change the dryer door opening directions?
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Clothes are still wet at the end of the drying cycle
- How to clean and maintain your Electrolux tumble dryer
- Tumble dryer's drying results are poor and laundry is damp after drying
- Start - Pause LED flashes on tumble dryer
- Tumble dryer not drying, not drying properly, too long drying
- Condenser tumble dryer taking too long to finish
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.