How does Hob²Hood function work in electronic gas plates?
Issue
- How does Hob2Hood function work in electronic gas plates?
Applies to
- Electronic gas hobs
Resolution
- Hob²Hood is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator.
- Speed of the fan is defined automatically on the basis of the mode setting and temperature of the hottest cookware on the hob.
- The hob automatically sets the speed of the fan according to the cooking process.
- You can also operate the fan from the hob manually.
- The hood operates only when the hob is activated.
- For most of the hoods, the remote system is originally deactivated. Activate it before you use the function. For more information refer to the hood user manual. Download .
Automatic Hob²Hood modes
Mode | Mode description | Automatic light | Automatic fan speed |
H0 | Manual | Off | Off |
H1 | Auto light | On | Off |
H2 | Fixed speed | On | 1 |
H3 | Auto speed low | On | 0-1 |
H4 | Auto speed mid | On | 0-1 |
H5 | Auto speed high | On | 0-2 |
H6 | Auto speed intense | On | 0-3 |
Was this article helpful?
Related Articles
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Hob blows/ trips fuse
- Hob displays error message E9
- What cookware is suitable for cooking zones with induction heating?
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays message L, the hob is locked
- Induction hob rear zone discolouration after boiling pan of water for pasta or rice
- Hob displays message F
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays error message E5