Connected appliances - What configuration has to be set on the router software?
Resolution
Question:
- What configuration has to be set on the router software?
- Can I use connected appliances with 5GHz Wifi network?
Applies to:
- connected appliances:
- washing machine
- tumble dryer
- oven
Answer:
1. Required router settings are as follows:
- Frequency 2.412 – 2.472 GHz for European market (You cannot connect your appliances to a 5GHz WiFi network)
- Protocol IEEE 802.11b/g/n 2x2 radio streams
- Max power < 20 dBm
Was this article helpful?
Related Articles
- Washing machine displays padlock - Electrolux
- The washing cycle is longer / shorter than it says on the display
- Washing Machine Not Draining Water – Error Code E20 or E21
- Washing machine does not take detergents / water remains in the fabric softener compartment
- How the Delay Start Function Works on Washing Machines
- Top loading washing machine does not have a filter/filter cannot be located
- Laundry is stiff or hard after washing in washing machine
- Washing machine displays error message E60
- Electrolux Washing Machine Displays an Error Code – causes and solutions
- Washing machine displays error message E30, C3 or emits 3 beeps
Related Articles
- Washing machine displays padlock - Electrolux
- The washing cycle is longer / shorter than it says on the display
- Washing Machine Not Draining Water – Error Code E20 or E21
- Washing machine does not take detergents / water remains in the fabric softener compartment
- How the Delay Start Function Works on Washing Machines
- Top loading washing machine does not have a filter/filter cannot be located
- Laundry is stiff or hard after washing in washing machine
- Washing machine displays error message E60
- Electrolux Washing Machine Displays an Error Code – causes and solutions
- Washing machine displays error message E30, C3 or emits 3 beeps