Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Laundry is stiff or hard after washing in washing machine
- Seal on the washing machine's door is damaged
- How to stop your washing machine vibrating and reduce noise / unbalanced load / reduce vibration during rinse
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- How to connect your Electrolux washing machine, tumble dryer or washer dryer to the app
- Can I connect my washing machine to a hot water supply?
- Washing machine displays an error code, how to fix it?
- Washing machine displays error message E50
- Washing machine does not take detergents / water remains in the fabric softener compartment
- Washing Machine Installation Guide