Washing machine display does not show the wireless indicator
Resolution
Issue:
- The display does not show the wireless indicator
- Cannot connect to the appliance
Applies to:
- connected washing machine
- connected tumble dryer
Resolution:
1. Check the wireless signal.
2. Make sure that the wireless connection is on.
Refer to paragraph "Configuring the washing machine wireless connection" in "WiFi - Connectivity setup" chapter in the user manual. You can download user manual .
3. Check your home network and router.
4. Restart the router.
5. Contact your wireless service provider if there are further problems with the wireless network.
Was this article helpful?
Related Articles
- Washing machine displays "CLE" - drum cleaning reminder
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine is leaking water
- How to use the steam programmes on your Electrolux washing machine or washer dryer
- Before using your Electrolux washing machine or washer dryer for the first time
- After cleaning the pump filter, the washing machine hums and does not start washing
- Cleaning the washing machine’s rubber seal if it's dirty
- The door of the washing machine cannot be opened
- Fluff / lint on laundry after removing from washing machine
- Can I connect my washing machine to a hot water supply?