Tumble dryer displays error message CD
Issue
- Tumble dryer displays error message CD
Applies to
- Tumble dryer
Resolution
If the tumble dryer displays error code CD, there is a problem with the door’s latch.
- If the door is closed properly and the tumble dryer still displays the error message, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Start - Pause LED flashes on tumble dryer
- Condenser tumble dryer taking too long to finish
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
Related Articles
- Start - Pause LED flashes on tumble dryer
- Condenser tumble dryer taking too long to finish
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer