Tumble dryer displays error message C8
Resolution
Issue:
- Tumble dryer displays error message C8
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C8, there is a problem with the temperature sensor.
2. To resolve the issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish
- Light in the drum of the tumble dryer does not work
- Electrolux tumble dryer care guide: Do's and Don'ts
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Tumble dryer’s water tank is empty
Related Articles
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish
- Light in the drum of the tumble dryer does not work
- Electrolux tumble dryer care guide: Do's and Don'ts
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Tumble dryer’s water tank is empty