Light in the drum of the tumble dryer does not work
Resolution
Issue:
- Light in the drum of the tumble dryer does not work
Applies to:
- Tumble dryer
Resolution:
1. If the machine is new, check whether the machine’s specification includes an internal light.
2. If the tumble dryer is on and the light in the drum does not work, contact an Authorized Service Centre.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Condenser tumble dryer taking too long to finish
- Tumble dryer displays error message E60 and does not heat up
- Heat pump dryer's drying cycle is too long
- Start - Pause LED flashes on tumble dryer
- Cleaning tumble dryer filters and condenser
- Clothes are still wet at the end of the drying cycle
- Iron Aid tumble dryer displays error message Err
- Drying Temperature in Heat Pump Tumble Dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer displays error code E54