Tumble dryer displays error code E54
Issue
- Tumble dryer displays error code E54
Applies to
- Tumble dryers
Resolution
- Reduce the load of laundry
- Check that there is no excessively heavy object in the drum, e.g. a duvet
- Check another socket and make sure that there are no other appliances running at the same time
- If the above steps are not successful, we recommend contacting an authorised service centre
Cause
- Error code E54 indicates a motor control problem
Was this article helpful?
Related Articles
- Start - Pause LED flashes on tumble dryer
- Condenser tumble dryer taking too long to finish
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Start - Pause LED flashes on tumble dryer
- Condenser tumble dryer taking too long to finish
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer