How to reset WiFi network settings on my Electrolux dryer
Issue
- How to reset WiFi network settings on my Electrolux dryer
Applies to
- Electrolux tumble dryers with WiFi connection
Resolution
To remove wireless credentials, follow the steps below:
- PerfectCare 900 tumble dryer
1. press and hold the Time Dry and the Delay Start buttons simultaneously for 10 seconds until the second acoustic signal
- - - appears on the display
Was this article helpful?
Related Articles
- Tumble dryer's drying results are poor and laundry is damp after drying
- How to clean and maintain your Electrolux tumble dryer to prolong its life
- Tumble dryer does not start / does not work
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E60 and does not heat up
- Clothes are still wet at the end of the drying cycle
- Warning light(s) of tumble dryer cannot be switched off
- Condenser tumble dryer taking too long to finish
- Tumble dryer emits unusual noises
- What can water from a tumble dryer be used for?
Related Articles
- Tumble dryer's drying results are poor and laundry is damp after drying
- How to clean and maintain your Electrolux tumble dryer to prolong its life
- Tumble dryer does not start / does not work
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E60 and does not heat up
- Clothes are still wet at the end of the drying cycle
- Warning light(s) of tumble dryer cannot be switched off
- Condenser tumble dryer taking too long to finish
- Tumble dryer emits unusual noises
- What can water from a tumble dryer be used for?