The dishwasher door opens after 2 minutes
Issue
- When the door is closed to start the programme, the door opens after 2 minutes
- After activating the cleaning program, the door opens 2 minutes after starting
Applies to
- Dishwashers with EDW7100 panel without display
Resolution
- The reason why the machine opens the door after approx. 2 minutes is probably that the DEMO function is activated.
- Disable the DEMO function
Press and hold the ECO+Auto buttons for 5 seconds. All LEDs/icons flash for 3 seconds
(The Demo function is activated in the same way) - Then try restarting a washing program and see if the problem is solved
Was this article helpful?
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwasher displays error code i23, not draining
- Dishwasher does not beep at the end of the cycle
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher is not heating up water
- Dishwasher Leaking – Causes and Solutions
- Too much foam in the dishwasher during or after finish of the cycle
- Dishwasher displays error code i30
- Dishwasher emits clicking/ticking noise during cycle
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwasher displays error code i23, not draining
- Dishwasher does not beep at the end of the cycle
- Symbols and programmes on your Electrolux dishwasher
- Dishwasher is not heating up water
- Dishwasher Leaking – Causes and Solutions
- Too much foam in the dishwasher during or after finish of the cycle
- Dishwasher displays error code i30
- Dishwasher emits clicking/ticking noise during cycle