SenseBoil indicators blink on induction hob
Resolution
Issue:
- SenseBoil® indicators blink
- SenseBoil® function does not work
- Cannot activate the SenseBoil® function
- How to use the SenseBoil® function?
Applies to:
- induction hobs with SenseBoil® function
Resolution:
1. Make sure the surface of the hob is dry.
2. Finish previous cooking activities or choose a free cooking zone without any residual heat.
If all cooking zones are already in use or there is some residual heat on all of them, the hob emits a beep sound, the SenseBoil® indicators blink and the function does not start.
3. Select a cooking zone within 5 seconds of activating the SenseBoil® function.
4. If the above advice does not work, check and change the power limitation settings on the hob.
Refer to the full description available in the user manual supplied with the appliance.
Download the .
Caution: Make sure that the selected power fits the house installation fuse. Technical help is recommended.
Was this article helpful?
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- How to use the child lock and lock function on your Electrolux induction hob
- How to clean your Electrolux induction hob
- Only one side of the hob is operating
- Hob displays error message E7
- Hob displays message L, the hob is locked
- How to use the frying function on your Electrolux SenseFry hob
- Gas Hob Ignition Won't Spark
- Can I put a protection mat on the induction hob?