Oven displays code F102
Issue
- oven shows error code F102 when you turn the appliance on
Applies to
- Ovens
- cookers
Resolution
1. The door lock may be defective, fully close the door.
2. Deactivate the oven by isolating it for a few minutes and plug it back in, alternatively, check the house fuse or the safety switch in the fuse box and activate it again if possible or consult a qualified electrician
3. If the display shows "F102" again, contact the Customer Care Department to arrange a service visit.
Cause
- door not fully closed
- problem with the electronics
Was this article helpful?
Related Articles
- How to remove a built-in oven door (video)
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- Electrolux oven care guide: Do's and Don'ts
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- The time is not shown on the display when the oven is turned off
- How to remove oven shelf supports for cleaning
- How to Proof Dough in an Oven (Without a Proofing Setting)
- Oven cooling fan runs all the time
- Connected appliances - What configuration has to be set on the router software?
- Oven does not heat up
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- How to remove a built-in oven door (video)
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- Electrolux oven care guide: Do's and Don'ts
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- The time is not shown on the display when the oven is turned off
- How to remove oven shelf supports for cleaning
- How to Proof Dough in an Oven (Without a Proofing Setting)
- Oven cooling fan runs all the time
- Connected appliances - What configuration has to be set on the router software?
- Oven does not heat up