Iron Aid tumble dryer displays error message Err
Resolution
Issue:
- Iron Aid tumble dryer displays error message Err
Applies to:
- Iron Aid tumble dryer
Resolution:
1. If the Iron Aid tumble dryer displays error message Err, fill the steam tank up to the MAX. level.
2. If the icons are still flashing, contact an Authorized Service Center.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- The dryer's cycle is taking too long
- Tumble dryer ends the programme immediately after the start
- Condenser tumble dryer taking too long to finish
- Water leakage from under the dryer
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer’s water tank is empty
- Clothes are still wet at the end of the drying cycle
- How to change the dryer door opening directions?
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Cleaning tumble dryer filters and condenser