Fridge freezer shows code E09
Issue
- Fridge freezer displays error code E09
Applies to
- Fridge freezer
Resolution
- Error code E09 is likely to occur after long term power failure
- Set the freezer temperature to a colder value or set Super Freeze. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Remove any products which have thawed/defrosted during this error. They can be used within a short period of time
- Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer
- If this warning continues an authorised technician needs to be contacted
Cause
- The freezer compartment is not cold enough
Was this article helpful?
Related Articles
- How to use “power cool”, and “power freeze” function?
- My fridge freezer is not working
- What is the optimal temperature in the fridge / freezer?
- Ice forms on the bottom of my freezer
- Serial number/Model number/Product number (PNC) on my fridge freezer
- Temperature in the fridge-freezer is too low
- Drip tray location on integrated fridge freezer
- Temperature in the fridge-freezer is too high, too warm, not cooling or not cold
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- How to avoid/reduce moisture formation in my fridge?