Blocked dispenser lid

Resolution

Check if the detergent dispenser lid is clean

Time: 10 min

GUIDE FOR CLEANING - The below diagrams do not show every possible variation of the drawers in our range, however the principles on how to remove the drawer and compartments remain the same.

{UM|For a more specific guide on your exact model please refer to the user manual}

Step 1: Remove the detergent dispenser drawer by pulling it firmly

Some models require pressing the catch downwards as indicated in the picture to pull the drawer out:

Step 2: Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent

After cleaning, put the top part back into position.

Step 3: Make sure that all detergent residue is removed from the upper and lower part of the recess

Use a small brush to clean the recess.

Step 4: Insert the detergent drawer into the guide rails and push it in

Run the rinsing programme without any clothes in the drum.