Wrong programme / option selected
Resolution
Wrong programme/option selection may lead to poor washing results
Time: 1 min
Select a programme/option (spin, temperature) according to the type of load and the degree of dirtiness of your garments.
For example, Quick wash program for very dirty and stained items will not wash properly.
Use a pre-wash cycle if needed. The pre-wash cycle must be run without any detergent.
Make sure you use the right amount of detergent. Use the amount recommended by the detergent manufacturer.
{UM|Refer to your user manual for the best washing solutions}
Was this article helpful?
Related Articles
- Normal noise (circulating pump, drain pump)
- Incorrect drain hose height
- Liquid detergent flap enabled for powder detergent
- Unlevelled appliance
- Restart the appliance
- Too many garments/overloading
- Leaks at the bottom - drain filter
- Leakage of the water from inlet hose
- Leakage from the door seal
- Kinked outlet hose
Related Articles
- Normal noise (circulating pump, drain pump)
- Incorrect drain hose height
- Liquid detergent flap enabled for powder detergent
- Unlevelled appliance
- Restart the appliance
- Too many garments/overloading
- Leaks at the bottom - drain filter
- Leakage of the water from inlet hose
- Leakage from the door seal
- Kinked outlet hose