A washing machine as good as new in 3 steps
Resolution
Cleaning the washing machine: A like-new washing machine in 3 steps
Clean your washing machine regularly in 3 easy steps and protect it from unpleasant odours, dirt, and ensure a long lifespan for your appliance.
Step 1:
Carefully free the rubber seal of your washing machine from hair, lint, and other dirt. A mild cleaner, vinegar, or citric acid can also be suitable for this purpose.
Step 2:
Remove the filter (usually located at the bottom right of your washing machine) and rinse it with clean water
Step 3:
Use a washing machine-specific cleaning agent approximately every 6 months (for example, Super Clean by Electrolux. Learn more about Super Clean). Add the cleaning agent to the washing machine drum and run the machine without any laundry.
Was this article helpful?
Related Articles
- Washing machine displays "CLE" - drum cleaning reminder
- Washing machine does not work / does not react
- The clothes are cold after washing
- Grey marks on laundry after washing in washing machine
- Connected appliances - problems with onboarding and Wi-Fi connection
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- After cleaning the pump filter, the washing machine hums and does not start washing
- The washing cycle is shorter / longer than indicated on the display
- Washing machine does not spin
- Washing machine does not take detergents / water remains in the fabric softener compartment