Why is there water or moisture is in my washing machine before the first use?
Issue
- Why is there water or moisture is in my washing machine before the first use?
Applies to
- Washing machines
Resolution
Each washing machine is subjected to a functional test during the final inspection in which a washing program is simulated.
- As a result of this, there may be some water or moisture in the new device.
- There is no error.
- It is also not a used device.
Was this article helpful?
Related Articles
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays "CLE" - drum cleaning reminder
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine is leaking water
- How to use the steam programmes on your Electrolux washing machine or washer dryer
- Before using your Electrolux washing machine or washer dryer for the first time
- After cleaning the pump filter, the washing machine hums and does not start washing
- Cleaning the washing machine’s rubber seal if it's dirty
- The door of the washing machine cannot be opened
- Fluff / lint on laundry after removing from washing machine