There is damage, a crack, scratch or hole in my Electrolux fridge freezer
Issue
- My freezer / refrigerator / fridge freezer / wine cooler is damaged.
- The appliance is dented, scratched, or missing parts
Applies to
- Fridge freezer
- Freezer
Resolution
1. If the damage was discovered when unpacking the appliance, contact your retailer immediately to find out whether it was damaged during delivery.
Do not attempt to connect or use the appliance.
2. If the damage was discovered after installation and first use, contact your installer to check whether it was damaged during installation.
3. If the damage resulted from something being stored in the appliance or other mechanical causes, a hole or crack, for example, can be concealed using an all-purpose sealant.
Ensure the sealant is approved for use in environments where food is stored.
4. If hinges, handles, drawers, lights or other parts are damaged, they can be replaced easily.
- If you wish to replace parts yourself, you can find spare parts, accessories and care products in our Webshop.
5. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Serial number/Model number/Product number (PNC) on my fridge freezer
- Cleaning the drain holes in the fridge
- Temperature in the fridge-freezer is too low
- Easy Door Opening overlay - installation instructions
- Fridge freezer shows F7 on the display
- Broken Freezer Drawers - Electrolux
- Temperature in the fridge-freezer is too high, too warm, not cooling or not cold
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Moisture in the vegetable drawer or under the glass shelf in the fridge
- Why is my fridge frosting up?